# 65 x 50 x 5mm Mild Steel Angle, Check it

- Written by: Jerry White
- Category: Uncategorized
- Published: February 12, 2020

With a thickness of 1/8″, both sides of this 72″ long angle bar are 1 1/2″ wide. This angle-iron by Precison(R) is made using carbon steel. Angle Bar – 1 1/2″ x 72″ x 1/8″ – Carbon Steel. The delay for delivery is an estimate and may vary according to the availability of products, or due to other extenuating circumstances beyond the control of RONA Inc. high quality z profile

For your information Kg/m refers to the Kilograms per Metre of the bar, as an example a 4.200 Metre length of 50 x 50 x 3mm Angle Iron (2.33 Kg/m) would weigh (4.2 x 2.33) 9.786 Kg’s Total. VEER STEEL MILL seeks to optimize locally sourced raw material to produce various steel product at the required specifications and quality as needed by our valued customers. The requirements to produce quality products and meet our customer’s expectations.

75 x 50 x 6mm Mild Steel Angle (5.65 Kg/m) 40 x 40 x 4mm Mild Steel Angle (2.42 Kg/m) 65 x 50 x 8mm Mild Steel Angle (6.75 Kg/m)

40 x 40 x 3mm Mild Steel Angle (1.84 Kg/m) 65 x 50 x 6mm Mild Steel Angle (5.16 Kg/m) 30 x 30 x 6mm Mild Steel Angle (2.57 Kg/m)

65 x 50 x 5mm Mild Steel Angle (4.35 Kg/m) 30 x 30 x 5mm Mild Steel Angle (2.18 Kg/m) 60 x 30 x 6mm Mild Steel Angle (3.99 Kg/m)

30 x 30 x 3mm Mild Steel Angle (1.36 Kg/m) 60 x 30 x 5mm Mild Steel Angle (3.37 Kg/m) 25 x 25 x 5mm Mild Steel Angle (1.77 Kg/m)

50 x 40 x 6mm Mild Steel Angle (3.99 Kg/m) 25 x 25 x 3mm Mild Steel Angle (1.11 Kg/m) 50 x 40 x 5mm Mild Steel Angle (3.37 Kg/m)

20 x 20 x 3mm Mild Steel Angle (0.88 Kg/m) 40 x 25 x 5mm Mild Steel Angle (2.37 Kg/m) 16 x 16 x 3mm Mild Steel Angle (0.71 Kg/m)

40 x 25 x 4mm Mild Steel Angle (1.93 Kg/m) 13 x 13 x 3mm Mild Steel Angle (0.55 Kg/m) For your information Kg/m refers to the Kilograms per Metre of the bar, as an example a 4.200 Metre length of 100 x 50 x 6mm Angle Iron (6.85 Kg/m) would weigh (4.2 x 6.85) 28.77 Kg’s Total.

To produce quality products and meet our customers’ expectations. We carry 6063-T52 Grade in both equal and unequal angle sizes. We also carry stainless grades of equal angle in grades 304/304L and 316/316L. An example of an unequal angle would be as follows L7 x 4 x 5/8″. For example the equal angle would have the same length on each leg, L6″ x 6″ x 1/2″ thickness, while an unequal angle has a different length on each leg. The bar size describes smaller angles, 1/2″ x 1/2″ x 1/8″ up to 2-1/2″. Galvanized steel angle / angle iron is used in numerous types of industrial applications, including: Cold Rolled, Galvanized A36, and HR ASTM-A36 Steel Angle (Angle Iron) 4″ x 4″ x 1/4″ Steel Angle ( Back to product ).